|
The first step to proper mold remediation is
to thoroughly analyze the type and extent of the problem.
-
A visual inspection of the affected area
will be conducted to discover the extent of the mold problem and document the type of
mold-damaged materials.
-
The use
of specialized equipment may be necessary to view spaces in ductwork or
within walls or to
detect moisture in building material.
-
Surface and/or bulk
sampling may need to be collected to identify specific fungal contaminants
and to establish the appropriate remediation protocol.
-
If an active leak is present, the
original source of the water damage must be located and stopped in order to proceed with
the remediation process.
Containment
The purpose of containment during
remediation activities is to limit the release of mold into the air
and surroundings in order to minimize the continued exposure of remediation
technicians, building occupants, and contents to mold spores.
Removal
Contaminated materials that cannot be
remediated must be sealed and removed from the building to prevent further contamination.
Restoration
The work area and areas used by the
remediation technicians for egress must also be decontaminated.
All areas will be decontaminated and
will be cleared for reconstruction by an independent industrial hygienist.
|
